2012 Jeep Wrangler Differential Carrier Parts


Showing 1 - 9 of 9 products
Image
SKU
Product
Rating
Price

Spicer
  • DIFFERENTIAL CARRIER DANA SUPER 30 UNLOADED OPEN 3.73 AND UP
  • Case Split 3.73 And Up with Dana Model 30 Axle with Unloaded
  • FSGR
  • Product Attributes:
    • California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
    • Axle Model: Dana 30
    • Bearings Included: No
    • Differential Case Split: 3.73 And Up
    • Vehicle Location: Front
    • Cover Bolt Quantity: 10
    • Differential Type: Standard
    • Carrier Type: Unloaded
  • Features:
    • Designed to meet OE standards set by Dana, the global leader in drivetrain components.
    • Made in the USA for automotive applications.
    • Built from a stronger grade of steel than the nearest competitors.
    • Engineered to be stronger than ever.
  • Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.

This Part Fits the Following OEM/Substitute Numbers:
DS2010999

Additional Fitment Information:
Vehicle Position Sub Model
2012 - Jeep Wrangler Rear Sahara

Spicer
  • DIFFERENTIAL CARRIER DANA SUPER 30 UNLOADED OPEN 3.73 AND UP
  • Case Split 3.73 And Up with Dana Model 30 Axle with Unloaded
  • FSGR
  • Product Attributes:
    • California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
    • Axle Model: Dana 30
    • Bearings Included: No
    • Differential Case Split: 3.73 And Up
    • Vehicle Location: Front
    • Cover Bolt Quantity: 10
    • Differential Type: Standard
    • Carrier Type: Unloaded
  • Features:
    • Designed to meet OE standards set by Dana, the global leader in drivetrain components.
    • Made in the USA for automotive applications.
    • Built from a stronger grade of steel than the nearest competitors.
    • Engineered to be stronger than ever.
  • Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.

Additional Fitment Information:
Vehicle Position Sub Model
2012 - Jeep Wrangler Rear Sahara

Yukon Gear
  • Yukon Replacement Front standard Open Carrier Case for Jeep JK D30
  • D30; bare case without internal gears; fits 3.73 and up gear ratios~Dana 30 JK Front. Bare Std. Open Carrier Case without Internal Gears. Fits 3.73 and up gear ratios
  • Yukon replacement standard open carrier case for Dana 30 JK front; 3.73/up
  • Differential Carrier Cases
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Jeep JK
    • Dana 30
    • 3.73 And Up
    • Front
    • Replacement Front Standard Open Carrier Case
  • Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
2012 - Jeep Wrangler V 3604 Front 6 Cyl 3.6L Unlimited Sahara 220

Yukon Gear
  • Yukon Replacement Front standard Open Carrier Case for Jeep JK D30
  • D30; bare case without internal gears; fits 3.73 and up gear ratios~Dana 30 JK Front. Bare Std. Open Carrier Case without Internal Gears. Fits 3.73 and up gear ratios
  • Yukon replacement standard open carrier case for Dana 30 JK front; 3.73/up
  • Differential Carrier Cases
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Jeep JK
    • Dana 30
    • 3.73 And Up
    • Front
    • Replacement Front Standard Open Carrier Case
  • Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
2012 - Jeep Wrangler V 3604 Front 6 Cyl 3.6L Unlimited Sport 220

Crown Automotive
  • Includes Case/Gear Set And Bearings; w/1/2 in. Ring Gear Bolts; For Use w/Dana 44
  • Differential Case Kit; Rear; Includes Case/Gear Set And Bearings; w/1/2 in. Ring Gear Bolts; For Use w/Dana 44;
  • Differential Case Kit
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Differential Case Kit
  • Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:
Vehicle Position
2012 - Jeep Wrangler Rear

Yukon Gear
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up
  • Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
  • Carrier Case
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana Spicer 30
    • Does Not Include Spider Gears
    • 3.73 And Up Ratio Only
    • Standard Open Carrier Case
  • Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
2012 - Jeep Wrangler V 3604 Front 6 Cyl 3.6L Unlimited Sahara 220

Yukon Gear
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up
  • Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
  • Carrier Case
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana Spicer 30
    • Does Not Include Spider Gears
    • 3.73 And Up Ratio Only
    • Standard Open Carrier Case
  • Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
2012 - Jeep Wrangler V 3604 Rear 6 Cyl 3.6L Unlimited Sahara 220

Yukon Gear
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up
  • Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
  • Carrier Case
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana Spicer 30
    • Does Not Include Spider Gears
    • 3.73 And Up Ratio Only
    • Standard Open Carrier Case
  • Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
2012 - Jeep Wrangler V 3604 Front 6 Cyl 3.6L Unlimited Sahara 220

Yukon Gear
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up
  • Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
  • Carrier Case
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana Spicer 30
    • Does Not Include Spider Gears
    • 3.73 And Up Ratio Only
    • Standard Open Carrier Case
  • Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
2012 - Jeep Wrangler V 3604 Rear 6 Cyl 3.6L Unlimited Sahara 220
Showing 1 - 9 of 9 products

Loading...